products

Ble5.0 5mA 2.4G Bluetooth Transmission Pcb Board

Basic Information
Place of Origin: China
Brand Name: CANYI
Certification: RoHS
Model Number: bluetooth 5.0 pcb board
Minimum Order Quantity: 200PCS
Price: Negotiated
Packaging Details: Boxed
Delivery Time: 1 - 2 Weeks
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 15,000,000PCS Per Day
Detail Information
Model Number: Bluetooth Transmission Pcb Board Application: Computer
Supply Voltage: 5V For Arduino STM: Electronic Module
High Light:

2.4G Bluetooth Transmission Pcb Board

,

5mA Bluetooth Transmission Pcb Board

,

Ble5.0 Transparent Transmission Module


Product Description

 

  •  
  •  

 

 

Product Introduction

JDY-23 transparent transmission module is based on Bluetooth 5.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 4db, maximum transmission distance is 60 meters, adopts imported original chip design, supports users to modify equipment through AT command Instructions such as name and baud rate are convenient and quick to use.
 
The JDY-23 Bluetooth module can realize module and mobile phone data transmission. By default, BLE Bluetooth can be used for product application without configuration.
 
Make BLE faster and easier to use in products

 

JDY-23 product parameters
model JDY-23
Working frequency 2.4G
Transmit power 4db(maximum)
Communication Interface
UART
Operating Voltage
1.8V – 3.6V
Operating temperature -40℃ - 80℃
antenna Built-in PCB antenna
Receiving sensitivity
-97dbm
Transmission distance 60 M
Master-slave support
Slave
Module size 19.6 * 14.94 *1.8 mm(Length, width and height)
Bluetooth version BLE 5.0(Compatible with BLE4.0, BLE4.2)
Awakening state current 800uA(Broadcast)
Light sleep state current <50uA (Broadcast)
Deep sleep current
9uA (No broadcast)
Instruction parameter saving
Parameter configuration power-down data is saved
SMT soldering temperature <260℃
rf-TX/RX peak current 5mA

 

Ble5.0 5mA 2.4G Bluetooth Transmission Pcb Board 0

Pin function description

  Features Description
1 VCC Power supply (1.8-3.6V)
2 NULL No
3 NULL No
4 OUTPUT1 IO1 output pin (support APP control high and low level)
5 OUTPUT2 IO2 output pin (support APP control high and low leve)
6 STAT Connection status pin, connected high, not connected low
7 INPUT7/PWM4

INPUT7 mode: For the input pin, the APP can read the status of this pin.

PWM mode: PWM4 output pin, APP can control PWM4
pulse width
 
The default is: INPUT7 mode
8 OUTPUT3 IO3 output pin (support APP control high and low level)
9 OUTPUT4 IO4 output pin (support APP control high and low level)
10 OUTPUT5 IO5 output pin (support APP control high and low level)
11 INPUT6/PWM3

INPUT6 mode: For the input pin, the APP can read the status of this pin.

PWM mode: PWM3 output pin, APP can control PWM3
pulse width
The default is: INPUT6 mode
12 INPUT5/PWM2
 
INPUT5 mode: For the input pin, the APP can read
the status of this pin.
 
PWM mode: PWM2 output pin, APP can control PWM2
pulse width
 
The default is: INPUT5 mode
13 OUTPUT6 IO6 output pin (support APP control high and low level)
14 OUTPUT7 IO7 output pin (support APP control high and low level)
15 INPUT4 For the input pin, the APP can read the status of this pin.
16 EINT2 Interrupt input pin (in the connected state, press to actively send IO status to APP)
17 ALED Broadcast indicator pin
18 INPUT3/PWM1

INPUT3 mode: For the input pin, the APP can read the status of thi pin.

 
PWM mode: PWM1 output pin, APP can control PWM1
pulse width
 
The default is: INPUT3 mode
19 TXD Serial output pin (TTL level)
20 RXD Serial input pin (TTL level)
21 EINT1 Interrupt input pin (in the connected state, press to actively send IO status to APP)
22 PWRC
 
Sleep wake-up pin, active low
 
In the connected state, the AT command can be pulled
low through the PWRC pin.
 
23 RST Reset pin, active low
24 GND Power ground

 

Serial AT instruction set
 
JDY-23 module Serial port sends AT command Must add rn
sequence instruction effect Master/Slave default
1 AT+VER version number S JDY-23-V2.1
2 AT+RST Soft reset S -
3 AT+DISC AT command disconnected S -
4 AT+STAT     00
5 AT+MAC MAC address S -
6 AT+BAUD Baud rate S 9600
7 AT+SLEEP Sleep S  
8 AT+NAME Broadcast name S JDY-23
9 AT+STARTEN Boot sleep or wake up S 0(开机唤醒)
10 AT+ADVIN Broadcast interval S 1(200mS)
11 AT+HOSTEN Slave mode or IBEACON working mode S 0(从机)
12 AT+IBUUID IBEACON's UUID S FDA50693A4E24FB1AFCFC6EB07647825
13 AT+MAJOR IBEACON's MAJOR S 10
14 AT+MINOR IBEACON's MINOR S 7
15 AT+IBSING Signal calibration at 1 meter   0x32
16 AT+ALED Broadcast LED indicator switch   1
17 AT+IBPWR IBEACON SING value S 50
18 AT+DEFAULT reset S -
19 AT+POWR Transmit power S 8
20 AT+ENLOG Serial output LOG switch S 0
21 AT+MTU Set the serial port to the APP to send a long number of packets S 1
22 AT+BATT Set battery S 0

 

 

Ble5.0 5mA 2.4G Bluetooth Transmission Pcb Board 1

JDY-23 basic application wiring diagram
 
JDY-23 and 3.3V MCU serial port transmission wiring diagram

 

Ble5.0 5mA 2.4G Bluetooth Transmission Pcb Board 2

Ble5.0 5mA 2.4G Bluetooth Transmission Pcb Board 3

 

Contact Details
Lisa

Phone Number : 18719066520

WhatsApp : +8618719066520